Best Solutions to fix the Netflix error code NW-2-5

Netflix carries thousands of users and many are increasing on a everyday. Now the Netflix Error NW-2-5 is seemed to be a message there on the TV, which informs users regarding the problem related to network connectivity. It means that there's a certain problem that doesn't allows its users to reach the movie streaming service.

On certain devices the error occurs; smart TV, play station 3 /4, Xbox 360/one, Roku, Blu-Ray player, Wii U or set-top Box or streaming media player. the issue can, however, be solved by all the users out there despite their technical skills. Thus we suggest all of you follow through the best guide and see how to fix Netflix NW-2-5 error on your Smart TV, PS4 & Xbox.

In most of the cases, the users suggest that they're not able to reach a certain application service through the other streaming applications works fine. At some time the nw-2-5 error appears after you update Netflix. The notification says something like this “couldn’t connect to Netflix. Please try again or restart your home network & a streaming device.” Although this issue has been seen many times still it can be very frustrating.

When all the things fail then users start searching for possible solutions all over the web. Now just follow through the article to find out methods that assist you to fix the WIFI ERROR NW-2-5 there on smart TVs and other devices.

Make sure no Firewall is blocking Netflix

Another reason that you may face the Netflix NW-2-5- error is merely a block set up there on the particular wifi network that you are using. it's common that if you're u are using wifi at school, work or university. Now keep in mind that the public network comes with a finite bandwidth or to put it, in other words, slow performance results in low-quality connection there between your device and the servers of Netflix.

If you're not using the public wifi network and still encounter the problem when you are using satellite internet or cellular data then you should consider changing your network. the best thing is that you switch DSL or cable internet and this shall result in good speed and better quality of connection.

Fixing Netflix NW-2-5 Error using Confirmed Working Methods

Connect Smart TV Straight to Modem

Are you using a wifi router that's attached to your modem? Now, this may be the problem that's causing the Netflix NW-2-5 to appear. We recommend you to try this method once you have rebooted the network. Moreover, the method explained below allows you to identify the wireless or router connectivity issues. If somehow you succeed then it means that the router is the problem.

If somehow you do not want this as a permanent solution then we recommend you to get in contact with people who have set up for you a home network. For this, they need to configure the router’s setting properly so you do not have to save the Netflix NW-2-5 error again. For this you need to follow the steps below:

In the first step, you need to off the smart TV. If you want, you can also unplug the TV cable.

Then you need to connect the smart TV with the modem that's using the ethernet cable.

After this, you need to unplug the modem for around half a minute and then plug it back. you need to be patient till the lights are back on

Then finally turn on the TV & open your Netflix application.

Restart your Network Modem and try Again

In the first step you need to turn off your TV, then un-plug it and then disconnect your wireless router as well because the modem

Once done you need to wait for like a minute and be patient on it. After this, you need to plug back everything and look carefully at your modem router.

Till all the lights appear back on the device you need to show some patience. this indicates that your network is ready for use. After this, you just need to grab your TV remote, turn on the TV to start watching the Netflix series that you are willing to watch.

Use a Wired Connection or 5 GHz for WiFi

There are some ways in which you can strengthen the wifi signal. For this follow a few things below:

In the first step, you need to check either your router is placed near the wireless device such as phones, microwave oven, radios, baby monitors and many others. If they're near then keep in mind to move them away from your router. By doing this you will lower the chance of signal interference.

If however, the signal is still low then you consider moving the router. you need to keep in mind that the reach of the routers signal is very limited thus you need to place it away from the devices that require it like computer system or TV

The final tip is that you place the router at a high place like the shelf or the top of the cabinets there in your house. Like this, you will catch a better signal than when you put it there on the floor.

How to remove VIRUS ALERT FROM MICROSOFT POP-UP Scam?

Microsoft virus is the name of various threats (scams, mostly) that are using the logo of Microsoft Corporation[1] to prove their legitimacy and trust. These malware series appear to be mostly scam applications that appear while browsing and begin providing fake security alerts to urge users to call certified Microsoft technicians. Additionally, victims are asked to pay for the help which they don't even need. this is the main reason why crooks decided to misuse the company's name.
Due to the increasing rate of potentially suspicious and malicious infections that have been targetting Windows users via providing them with the original Microsoft logo, the Corporation itself released a guide on what kind of viruses are spread the most & how to prevent Microsoft virus & suspicious programs from sneaking into the targeted system.[2] However, the main thing to do is to disable the malicious master.exe or similar file & then reset the web browser.

VIRUS ALERT FROM MICROSOFT is another scam that's very similar to the previous one. This message also claims that the pc is locked due to a malicious infection and the only way to repair the damage is to contact the fake Microsoft helpline. This technical support number also is another fake one.

If you read the message, you will find that Microsoft virus scam claims many strange things such as that your computer is spreading malware throughout the web sphere, is running third-party programs, has been hacked and that the fake experts have been locking the system for safety. don't believe in such things, these are LIES


Uninstall Microsoft virus from Microsoft Edge

Reset Microsoft Edge settings (Method 1):
Launch Microsoft Edge app & click More (three dots at the top right corner of the display).
Click Settings to open more options.
Once Settings window shows up, click Choose what to clear button blow Clear browsing data option.
Here, select all what you want to remove &  click Clear.
Now you should right-click on the start button (Windows logo). Here, select Task Manager.
When in Processes tab, look for Microsoft Edge.
Right-click on it and choose visit details option. If can’t see visit details option, click More details and repeat previous steps.
When Details tab show's up, find every entry with Microsoft Edge name in it. Right click on each of them & select End Task to end these entries.


Resetting Microsoft Edge browser (Method 2):
If Method 1 failed to assist you , you need to use an advanced Edge reset method.

Note: you need to backup your data before using this best method.

Find this folder on your computer: C:\Users\%username%\AppData\Local\Packages\Microsoft.MicrosoftEdge_8wekyb3d8bbwe.

Select every entry which is saved on it & right click with your mouse. Then Delete option.

Click the start button (Windows logo) & type in window power in Search my stuff line.

Right-click the Windows PowerShell entry & choose Run because administrator.

Once Administrator: Windows PowerShell window show's up, paste this command line after PS C:\WINDOWS\system32> and press Enter:

How to Fix Lenovo Laptop Error Code 1962?

The error 1962 occurs on Lenovo PC's at Windows boot, with the error message “No OS Found” displaying on the screen. Here is the full error message:
Error 1962: No operating system found. Boot sequence will automatically repeat.
According to the report's on Microsoft’s official support page from Lenovo customers, the error is probably caused via corrupt Windows startup, faulty HDD or SATA cable, a faulty hard disk drive and incorrect BIOS settings.
When this error occurs, Windows can't be started properly and users are unable to access their valuable data stored on the pc . Most Lenovo users don't know how to Lenovo computers error 1962 and they are worried about their personal data.
Well, if you have important data stored on your computer, you can follow the steps below to retrieve data from the pc with error 1962. After recovering the valuable data, you can try solutions mentioned in this post to fix the problem.
Now let’s see how to recover data from the computer with the boot error 1962.


How to Recover Data from the computer with Error 1962

Step 1. Connect the boot USB drive to the pc with Lenovo error 1962.

Step 2. Press a specific key to boot into the BIOS settings menu during the start-up. After entering BIOS, set the bootable USB drive because the first boot option and then boot from the drive.

Step 3. On the MiniTool PE Loader interface, MiniTool Partition Wizard will be launched automatically. Just wait a few seconds.

Step 4. On the interface of MiniTool Partition Wizard, launch the data Recovery wizard.

Step 5. After launching the data Recovery function, you can see that all disks and partitions on the pc. Select a partition that contains important files and click Scan.

Step 6. wait for the scanning completed. During the method of scanning, you can pause or stop the scanning by clicking the Pause or Stop button.

Step 7. After scanning, check needed items from the recovered files and click Save button.

Step 8. At last, choose a directory to save selected file's. it's recommended to save the recovered files on another drive. Otherwise, the lost/deleted data could be overwritten. you can save the files to an external device.

After retrieving file's from the PC that encountered error 1962, you can feel free to try various solutions to fix the Lenovo error 1962. After analyzing several post's, here’s what we learned on how to fix Lenovo error 1962 “No operating system Found”.


How to Fix Lenovo error 1962

Step 1. Power on your computer, press and hold the right hotkey to enter BIOS. you can try pressing F1 for Lenovo desktop's, F2 or Fn + F2 for Lenovo laptops. don't release the function key until you see the BIOS screen.

Step 2. Once BIOS open's, you can release the specific hotkey. Use arrow keys on the keyboard to switch to the Boot section.

Step 3. Check the boot order. If the boot drive (SSD/HDD) isn't the 1st boot option, use the “+” or “-” keys to shift it to the top boot option.

Step 4. Press F10 to save the BIOS order changes & exit the BIOS.


Run Startup Repair

Step 1. Download Windows 10 Media Creation Tool from the official Microsoft website and make a bootable USB drive with the tool.

Step 2. Connect the bootable USB drive to the Lenovo pc which encountered the error 1962. Enter BIOS and set the USB drive because the first boot option and boot from it.

Step 3. On the Windows Setup page, select language, time & currency, keyboard output settings and then click Next.

Step 4. Then click on Repair your computer > Troubleshoot > Advanced options > Startup repair to launch Startup repair on Windows 10.

Step 5. Choose your account, type the password, & then Windows will attempt to automatically repair your PC.

Ways To Fix Netflix Wifi Error

Netflix Code NW-2-5 error usually occurs due to interruption between the device that you are streaming the application on & the connection. If Netflix has encountered this error, then you must check with your home network for a solution.
Smart televisions nowadays come with inbuilt set-top boxes or require a home network to connect to these applications. If you get Netflix code NW-2-5 on LG smart TV then you must ensure that the home network is well connected to the device or else restart the complete set-up. At times, fixing code NW-2-5 netflix wifi error on Samsung smart TV gets difficult, though some tips can definitely get your favorite series streaming back on your smart TV.

Ways To Fix Netflix Error Code NW-2-5 on Your Smart TV

Test Your Internet Connection -- to ensure that your Internet isn't providing you trouble, consider running a network connection test. you can use the one powered by Netflix -- fast.com, because it checks the connection and the data speed to its own servers. Else one can find plenty of options online.

Check if your network allows the Netflix streaming app -- Netflix error NW-2-5 occurs when there's a block set up by your Wifi network. There are high chances that you are using public Wi-Fi or one in your office, airport lounge or college library. All the public internet works usually put a blockage to certain streaming applications. They also have limited bandwidth or sometime's a slow data speed that actually bar's the performance of Netflix.

Bypass the Router -- Netflix code NW-2-5 error occurs when your W-Fi router is attached to one of your modem's. in this case, reboot your network and try the following step's after that.

Turn off your Smart TV or just unplug the TV cable.
Connect Smart TV with the modem using an ethernet cable.
Unplug the modem for at least 30 second's & attach the plug again. Wait until the lights start blinking again.
Turn on the TV & connect with Netflix to resume.
Restart your Smart TV -- turn off your TV first and then unplug the power cable. provides a gap of at least one minute between turning the TV off and detaching the power cable. turn on the TV now and plug the device. Open Netflix application and check the streaming now.

Boost your Wi-Fi Signal -- Always keep your router away from wireless devices such as smartphones, microwaves, radios, wireless speakers, etc. this way the signal interference would be fixed. If the signal is still low, try to place the router at the height, for instance, a shelf or upper cabinet in your room. you can also hang the router like a wall clock to strengthen its signal.

British Telecom Internet Service -- Reports suggest that BT customers face a lot of issues streaming Netflix as they always get Netflix error NW-2-5. it's because Netflix is blocked by BT Parental control and in such cases, all you need to do is alter your network configurations with BT. Here are the steps :

Log in to MY BT connection using the username & password.
Post logged in, navigate to BT parental control & then to Personalize your settings.
Post that, turn off your BT parental controls and the changes to configuration would be applied after 10 minutes.

Test Your Internet Connection

Check your Xbox 360 DNS configuration by clicking on the main menu and click Settings.
Press the Guide button on the controller.
Go to Settings followed by System Settings and then to Network Settings.
Choose the available network and then visit Configure Network.
Select Wireless Network & select Test Xbox LIVE Connection.
Select Continue.

How To Fix ALERT THIS COMPUTER IS BLOCKED?

This guide is for a new Techtreme that pretends to be a PC optimization program called Sweep Clean PC Pro, but actually replaces your desktop with a Window that displays a fake security alert and a Windows product activation screen. The screen will state that Windows isn't activated and that you need to enter your product key in order to use it again. As no product key you enter will work, it also includes a telephone number that you can call to receive tech support. The "enter a product key" screen will also contain buttons that open the TeamViewer, Supremo, Logmein, and the Ammyy sites as well as a button called CMD that opens the command prompt.
This program will also continuously display a pop-up security alert that states "Your Windows (Microsoft) Computer has been Blocked". The text of this pop-up alert is, Read this article ALERT THIS COMPUTER IS BLOCKED.


To remove Your Windows (Microsoft) Computer has been Blocked Alert , follow these steps:

1. Click on the software ADWCEANER and then you have to double click. As the AdwCleaner is downloading while you click the link for the download.

2. Double click on the setup file on the left corner of the browser. In some cases, the files downloaded can be accessible from the download folder.

3. If you see user control pop-up, you can supersede that by clicking allow access.

4. As you move to click on the scan and as the system scan is performing the activity for the unwanted malicious files, you would need to wait as this may take a few minutes to complete the process.

5. You can clean and repair the system by using the appropriate option. This will help in the removal of the relevant files from the system.

6. As you clean the system, it is highly recommended to restart the device. As the malware removal process is complete, the final step involves clean and then restarts to complete the removal process.

Troubleshooting Steps Fix DNS_PROBE_FINISHED_NXDOMAIN

For those of you working with WordPress on a daily basis, errors specific to the CMS such because the white display of death or database connection error's are somewhat common occurrences. However, another subset of error's you will probably stumble upon are those tied to your internet connection and DNS. a very common error that Google Chrome users get when trying to browse to an internet page is Fix DNS_PROBE_FINISHED_NXDOMAIN. this can be downright frustrating because suddenly you can not browse to your internet site or perhaps even anywhere at all.
If you are seeing this error while trying to get to your WordPress site, don’t worry, this is fairly simple to fix. check out the recommendations under on how to get connected again. this can also work for other browsers, such because Firefox, Edge, etc.


How to Fix DNS_PROBE_FINISHED_NXDOMAIN

Release and Renew IP Address

Windows
In Windows just open up command prompt via pressing the Windows logo key and R. Then type “cmd” and

Type in ipconfig /release and hit Enter. this will release your current IP address.

Then type in ipconfig /flushdns and hit Enter. this will flush your local DNS cache. you should see a “Successfully flushed the DNS resolver Cache” if it worked.

Then type in ipconfig /renew and hit Enter. this will renew your IP address.

You might also try resetting your IP settings and Winsock catalog with the following commands: netsh int ip set dns & netsh winsock reset.

An alternative way to flush and renew your DNS is simply via disabling your network adapter & re-enabling it.


Mac
To release and renew your IP address on a Mac, visit System Preferences…

Mac system preferences

Click on the network icon & then click “Advanced.”


Mac network advanced

Click the TCP/IP tab heading if you are not already in there. Then click on the “Renew DHCP” lease button.

Just like we did above in Windows, Mac customer can also clear their local DNS cache. Although this is done in a special place. visit Utilities and then click on “Terminal.”

Enter in the following command:


Fix DNS_PROBE_FINISHED_NXDOMAIN on Chromebook

Before you start, ensure that your Chromebook computer is connected to network (Wi-Fi or Ethernet)
Click on Time panel in the bottom right corner.
Now, click on Connected to [your network name].
Here, click Network.
Choose Google name servers option.

Best Troubleshoot Guide Netflix Error NW-2-5

You just got cozy, and your snacks are ready; it’s time to fire up Netflix and enjoy yourself. You hit Play, and after a few minutes, the screen shows NETFLIX ERROR NW-2-5. Typically, this error occurs when your device is having connection issues.
This article will show you how to troubleshoot and fix this error with the most commonly used devices.


Smart TV

Typically, you’ll see this error on your smart TV is because the network you’re using doesn’t support streaming. Or it has limited bandwidth capabilities. But if you’re at home and using your wireless network, you can try restarting your home Wi-Fi.

Here is how you do it:

Turn off your TV.
Now unplug your router or your modem for approximately 30 seconds.
Plug the router or modem back in and wait for the Wi-Fi signal to appear.
Turn on your TV again and try connecting to Netflix.

If you’re still having problems connecting to Netflix via your smart TV, check the status of your wireless network with another device.

Try reaching Netflix via laptop or desktop computer. If that’s working fine, that means you’ve successfully restarted your Wi-Fi network. the next step is to restart your smart TV. Follow these steps to do that:

Unplug your TV from the wall for about 60 seconds.
Reconnect the TV. Press the power button and hold it for about five seconds. in case there's no power button on the TV, leave the TV unplugged at least five minutes.
Try connecting to Netflix again.


Xbox One
Another popular way to watch Netflix is trough the Xbox One device. If you see the dreaded error code on the screen, your first move should again be to check your home network and test the quality of your internet connection.

If you can’t connect to Netflix after that, you should confirm your Xbox DNS settings. If you’re not sure how to do that, follow these steps:

Select “Menu” on the controller and then click “Settings.”
Now click on “All Settings.” If you don’t see that option, move on to the following step.
Click on “Network” and then “Network Settings.”
Click on “Advanced Settings,” followed by “DNS Settings.”
Click “Automatic” and then select the B button to confirm settings.

How to Fix DNS_PROBE_FINISHED_NXDOMAIN Error Issues?

Google Chrome currently holds the major share because the most widely used web browsers across all platforms. With over 60% usage share across all platforms, Google Chrome is undoubtedly the most preferred browser globally. But, it forever frustrates when you get DNS_PROBE_FINISHED_NXDOMAIN Google Chrome error every now & then. Well, that’s the case as many customer have complained about DNS_PROBE_FINISHED_NXDOMAIN error on their Google Chrome browser.
But, nothing to worry about. we've found a few ways to solve DNS_PROBE_FINISHED_NXDOMAIN issue in Chrome. Before we get to the solution, let’s understand the issue first.


Simply restart the DNS Client Service by the following the easy steps below to resolve the problem:

Open “Command Prompt” window using the shortcut keys “Windows” and “R”. Type services.msc in the Open field and hit Enter.

On the Local Service's window, scroll down to find DNS Client. Right click on DNS Client & choose “Restart” from the option's.

If the “Restart” option is greyed out same because in our case, then you need to restart the DNS Client using command prompt.

Go to the command prompt window and this time type cmd in the Open field and hit Enter.

Enter the commands as follow to stop and begin DNS Client.

net stop dns cache

This command stop's the DNS Client & disables DNS caching.

net start dns cache

This command starts the DNS Client and enables DNS caching.

If you get an error as follows while using these commands, then you need to run CMD as a network service for the commands to work.


You can also try this solution to stop and begin DNS Cache on Windows 10. the solution is taken from feedback via a staff moderator at an official Microsoft forum.

Go to command prompt window and enter regedit to open the Registry Editor on Windows.

Navigate through the registry and visit HKEY_LOCAL_MACHINESYSTEM > Current > Control > Set > Services > Dnscache. Locate the start registry key & change its value from 2 (Automatic) to 4 (Disabled)


Change DNS Servers

For Windows Users:

Open control panel and visit Network and Internet.

Next, on the Network and Internet section, click Network and Sharing Center.

In the Network and Sharing Center, you need to choose “Change Adapter Settings“.

It will open a window displaying other connectivity option's. Right-click on the current active connection from the lot and visit Properties.

In the Properties area, click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) based on the DNS values you got.

In this case, we are using IPv4 DNS of Google. based on your ISP configuration, the DNS will be either set to detect automatically or the ISP must have added DNS value's of their own. In either case, you need to Enter the new DNS values & hit ok to confirm the changes. Create sure to the option “Use the following DNS server addresses” is already active.


For Mac Users:

If you're a Mac user, then you need to go to System Preferences by clicking the Apple icon on the top-left corner of Macbook or iMac and click on Network.

Choose the active connection from the list of connections in the Network section and click “Advanced” at the bottom.

In the Advanced section, visit the DNS tab. Click the (+) button to add or update new DNS servers. Remove the old one's if there are any using (-) button. Click ok to confirm the change's.


Clear browser history and cache on Google Chrome

Open Google Chrome on your Android device and tap the three dots or parallel lines on the top right corner.

Tap on Settings and visit Privacy section.

Select “Clear browsing data” in Privacy section.

You can choose the time intervals or remove history and cache of all time as per your preference. All of the clearing browser cache & history is recommended for this fix unless you know the exact time when the error started to show.

Tick the Browsing history and Cached images and files in the “Clear browsing data” section and tap Clear Data button at the bottom.

How to Fix Reset Windows 7 without Password?

You can regularly restore your PC or laptop to factory settings for troubleshooting some computer crashed and issues, or to wipe out your personal data from PC, or to boost the performance. For those reasons if you're searching for how to factory reset Windows 7 without password, don't worry. in this article, we will share best easy techniques to solve factory reset Windows 7 no admin password issue.

How to fix common windows defender won’t scan issues?

Windows Defender, integrated into Windows 10, run's in the background & scan's your files for malware. to improve performance for tasks like compiling code or running virtual machines, you can add an exclusion and Windows Defender will never scan those files.
Exclusions can also help if you’re running into false positives where Windows Defender marks legitimate files as malware.
Warning: be careful about what you exclude. Windows Defender won’t scan your excluded files and directories for malware. You wouldn’t want to exclude everything in your Downloads folder, for example!

First, we need to launch Windows Security to change some settings. Open the start menu and type “Windows Safety.” Then, select the “Windows Security” app.

In Windows Safety, navigate to “Virus & Threat Protection.” Then, click “Manage Settings.”

In “Virus & Threat Protection Settings,” scroll down to the very bottom of the page, & click “Add or Remove Exclusions.”

On the Exclusions page, you can add or remove file's that you want to exclude from Windows Defender scans. to add an exclusion, click the “Add An Exclusion” button beside the big plus symbol (+).

A small menu will pop up allowing you to define your exclusion by File, Folder, File type, or Process.

What you choose depends on what type of exclusion you're trying to create. Here’s what each choice does.

File: If you select this, a box will pop up allowing you to browse your computer to select a single file that will be excluded from future scans. Select the file you’d like, then click “Open.”
Folder: like the File option, this will let your browse your computer for a specific folder to exclude from scans. The folder’s contents and subfolders will be excluded as well.
File type: A box will pop up asking you to enter a file extension (e.g., “.MID”) representing the file type that you’d like to exclude. All files of that type will be excluded from future scans. This one is dangerous because you might accidentally exclude a large class of potentially hazardous files, such as PDF or DOC files.
Process: A pop-up will ask you to enter the name of a process (a running program, i.e., “explorer.exe”) to exclude from scans. If a certain program you know is safe keeps getting flagged by Defender, you can enter it here.

How to troubleshoot windows defender error 0x80070422?

How to fix windows defender error 0x80070422 update. some time when we have some uncomfortable matter from windows update, we often disable windows update capacity. This one assist we avoid nuisance with unknown update via Microsoft, however it make we've error 0x800704422 and some another error, include : windows can't install internet Framework. this article, i am going to help you simply to fix it.

How can i solve windows 10 update error 0x80070422?

1. make sure that windows update service is running

Open control Panel and visit Administrative tools.

find and run services.

when the services window opens find windows update service and double click it to open its properties.

In windows update properties find Startup type and from the dropdown choose automatic. also, check the service status, and if the status isn’t set to running click the begin button in that section to begin it.

click ok to save your settings and restart your pc.


2. Disable IPv6

Open control Panel and visit network and Sharing center.

find your connection, right-click it and choose properties.

You should see the list of items. find internet Protocol version 6 (TCP/IPv6) and uncheck it.

Now click ok to save changes.

Restart your pc and see if the problem is resolved.


you could also do this via using Registry Editor.

type regedit into the search bar and choose Registry Editor from the list of results.

Navigate to the following key: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTCPIP6Parameters

proper-click the Parameters on the left pane and choose New > DWORD (32-bit) value.

in the name field enter DisabledComponents.

right-click the new DisabledComponents value and choose modify.

enter ffffffff as value facts and press ok to save changes.

close Registry Editor and restart your pc.

if you want to enable IPv6, just navigate to the same key as in Step 2 and change the value of DisabledComponents to 0 or just delete the DisabledComponents key.

How to windows 7 stuck on starting windows?

Windows 7 stuck on starting Windows screen? Or Windows 10 stuck on loading screen is a very common problem nowadays. This post introduces you with several effective solutions to deal with a computer stuck on boot screen problem.
Does your computer get stuck on starting a Windows screen when you tried to turn on a computer? For no reason, when you start Windows 10, 8, or 7, it hangs at the start logo, and it even lasts minutes to hours sometimes? Some users reply that it may work to force the pc to shut down, and when computers get restarted, everything would be alright. However, this is not a long-term solution and not a very good method to protect the pc , data, and system security. don't worry. EaseUS will give you complete solutions to fix Windows 10/8/7 stuck on startup/boot/loading screen issue here.
Now you may follow any one of these offered methods to solve the Windows stuck on loading screen problem with ease now. And you shall be very careful while trying to follow these offered solutions.


Unplug USB Dongle
Windows 10 stuck on Windows logo with spinning dots may occur as of faulty USB storage. in this case, try to disconnect all the worked USB dongles connected to your computer with a USB cable, including blue tooth, SD card readers, flash drive, wireless mouse dongle, and more.
This method gains a lot of positive feedback online. And if you're lucky enough, the problem will be solved. If this method won't fix Windows 10 or Windows 7 stuck on starting windows problem, continue to try the next way.


Check & Fix the file system with the Partition Manager

Make a WinPE bootable disk from another healthy computer, which is running the same system as your present PC.
Connect the bootable disk USB drive or SD card with a computer and select to boot from the disk.
Select to enter EaseUS Partition Master. There you can directly perform a disk or partition copy operation therefor, to copy partition data into a new storage device; (Do remember to connect another new drive or storage device with PC.)
Then use EaseUS Partition Master to check and fix hard drive error.

Step 1: Open EaseUS Partition Master on your pc. Then locate the disk, right-click the partition you want to check, & choose "Check File System".

Step 2: in the Check file system window, keep the "Try to fix errors if found" option selected & click "Start".

Step 3: The software will start checking your partition file system on your disk. When it's completed, click "Finish".


Manually Check and Fix hard drive Error
Turn on Windows and press F8/Shift to enter Safe Mode & select Repair Your Computer.
If it asks you to choose keyboard, click OK; If it tells to choose the account, choose your account and click OK; If you have a password, enter it.
When you see System Recovery Options, click "Command Prompt" > type chkdsk in command prompt and hit Enter.
This will scan and fix errors in the hard disk drive. And then, you can restart the pc to continue to enjoy Windows 10/8/7 without any problems then.


Check System RAM

Try to change or reinstall the pc and restart the system in safe mode: press F8/Shift on startup.
Select Safe Mode and hit Enter.
Press Win + R or run MSCONFIG & click OK.
Select a clean boot option in Under Selective startup.
Press Apply and restart Windows in normal mode.

How to windows defender error 0x80070422?

Fix error: 0x80070422 Window update & windows defender can't update. some time when we have some uncomfortable matter from windows update, we often disable windows update capacity. This one help we avoid nuisance with unknown update by Microsoft, but it make we've error 0x800704422 and some another error, include : windows defender error 0x80070422. this article, i'm going to assist you simply to fix it.


Solution 2020:

1.Goto your control panel.

2.Click to open “windows update” then select the setting because“change settings”.

3.Here you can turn on the windows update setting's.

4.Finally again try to access that same file the issue is fixed.

Method 1:
/Press: Window + R for starting run command :
/Typing services.msc en press Enter
/Find the “windows update ” and enable it
/Restart computer and check again the error


Windows update encountered error 80070422, 0x80070422

Method 1:
Using the built-in function of Windows Update Troubleshooter, this function fixes a few problems with Windows updates and can also solve this error for you.

However, if this method doesn't work, try the 2nd way.

Method 2:

Change (Change) or re-enable (Restart) the Windows Update service.

You are locked out of the system logon as an administrator to run this step. Therefore, you need:

Open Administrative Tools: Open control panel in administrative tools and select Administrative Tools.
Open Servies (left click 2 times). (Enter password or confirm administrator rights if required).
In the Name column, find the Windows Update service name and right-click it to open Properties.
In the General tab, navigate to the Startup type and change the status to Automatic.
In Service Status, check if the request is already running. If not, select Start, enter a password, or confirm administrative privileges if required.